|
|
|
PL Series Cartridges
PL pleated cartridges are constructed of durable, spunbond non-woven, reusable polyester fabric which has more than from 9-7/8" to 30" four square feet of fabric media while the large diameter has more than sixteen square feet. The media has been pleated to maximize its dirt holding capacity and extend the time period between changes. The media's chemical and bacteria resistance makes these cartridges suitable for most Food and Beverage and as well as water applications.
The Long-Clean type pleated cartridge
|
|
|
|
PL10-5 |
PL-10-25--N |
PL10-5-BB |
OEM are welcome |
- Extensive applicability
- Great flow, small resistance
- End and filter media are glued together without chemical release.
- Great capacity of taking pollutants
- Superior Flow Rate
- Economical, and long service life,reusable
- synthetic fiber (100% cellulose-free）
| SPECIFICATIONS |
END CAP: |
THERMOETTING RESIN |
| CENTER TUBES |
POLYPROPYLENE |
| TEMPERATURE RANGE: |
4℃～60℃ (40℉～140℉) |
| MAXIMUM PRESSURE: |
40 PSID |
Order Informations
SERIES |
LENGTH |
MICRON |
SPECIALS |
| PL |
-10 |
-5 |
-BB |
| PL PLEATED CARTRIDGE |
5U=125mm
5=127mm
|
MICRON RATING: 1-100 UM |
BB:big blue |
10U=251mm
10=254mm |
N:with PP net |
20U=500mm
20=508mm |
C: cellulose |
30U=750mm
30=762mm |
S: synthetic fiber (100% cellulose-free) |
| 40=1016mm |
| 50=1270mm |
|
The Best -Pure type pleated cartridge
Which offer a longer service life and contain, no binder, adhesives or surfactant for wide compatibility of fluids.
|
|
|
|
PLP10-0.2-S2-S |
PLP10-1-CO-E |
PLS10-0.45-OO-S |
OEM are welcome |
- RO Pre-filtration
- DI Pre-filtration
- Cooling Towers
- Med. & Low Viscosity Liquids
- Pharmaceutical
- Food & Beverage
- Laboratory
| SPECIFICATIONS |
END and CENTER CORE: |
POLYPROPYLENE |
| RECOMMENDEDTEMPERATURE: |
4℃～60℃ (40℉～140℉) |
RECOMMENDED REPLACEABLE
PRESSURE DROP: |
35.6 PSI (2.5kg/c㎡) |
| MAXIMUM PRESSURE: |
68℉ at 70 PSI 20℃ at 4.9kg/c㎡
140℉ at 70 PSI 60℃ at 2.8kg/c㎡
203℉ at 70 PSI 95℃ at 1.4kg/c㎡
|
Order Informations
SERIES |
LENGTH |
MICRON |
END CAP TYPE |
GASKET TYPE |
| PLP |
-10 |
-0.5 |
-SO |
-S |
PLP=PP MEMBRANE
PLN=NYLON 6
PLS=PES MEMBRANE
PLE=PTFE MEMBRANE
|
5=127mm
|
MICRON RATING: 0.2-20 UM |
S:FIN TYPE |
S:Silicone |
| 10=250mm |
P:FLAT TYE |
E:EPDM |
| 20=500mm |
O: OPEN TYPE |
V: Vilton |
| 30=750mm |
2: 222 TYPE |
|
| 40=1016mm |
6:226 TYE |
Attentions:
1.PL filters can be used for whole filter housing, water purifier or reverse osmosis filter systems.
2. Ideal for use with well water.
*OEM are welcome.
|
|
